Sweeping bucket CBS series
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/02/benna-spazzatrice.jpg)
The CBS sweeping bucket is an ideal sweeper for collecting milled asphalt, large quantities of gravel and aggregates on construction sites.
Designed to be applied frontally on small and medium-sized construction machines, it is equipped as standard with oversized PPL brushes, side and front protection tyres, chain drive, and a heat-treated steel blade with a double bevel.
It is also ideal for cleaning roads, yards and outdoor surfaces in general.
CM sweeping buckets are made with a very robust structure that allows intense use even in harsh environments, guaranteeing solidity and reliability over time.
- Working width from 1 up to 2,5 mt
- Bucket collector
- Adjustment of brush wear
- Easy to inspect and replaceable bearings
- Chain transmission
- Easy and fast maintenance
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/02/avanti-e-indietro-450x450.jpg)
It sweeps in both directions
The CBS series cleans and collects both working forwards and backward.
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/02/benna-spazzatrice-con-acqua-450x450.jpg)
Single CM Water Kit
Single CM water tank with integrated 12/24 V pump and vacuum filter (opt.).
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/02/benna-spazzatrice-gomme-laterali-450x450.jpg)
Protection rubbers
Sector-shaped, for quick and cost-saving maintenance.
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/02/benna-spazzatrice-spazzola-laterale-450x450.jpg)
Side cleaning brush
Both depth and tilt adjustment.
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/01/Spazzola-laterale-PPL-450x450.jpg)
PPL side cleaning brush
ø600 with independent hydraulic motor
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/01/Spazzola-laterale-MIX-450x450.jpg)
Mixed steel side cleaning brush
ø600 with independent hydraulic motor
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/01/Spazzola-laterale-in-ACCIAIO-450x450.jpg)
Steel side cleaning brush
ø600 with independent hydraulic motor
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/01/uggello-per-spazzola-laterale-450x450.jpg)
Side brush nozzle
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/01/Spazzola-interna-mix-450x450.jpg)
Mixed steel internal brush
Main brush in PPL/Steel.
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/01/Kit-Acqua-450x450.jpg)
Watering kit with tank
Watering kit by pressure with 12 V pump and sprayers, 100 lt tank
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/01/kit-a-pressione-450x450.jpg)
Watering kit
by pressure for operating machines with own tank
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/01/sottolama-bullonato-450x450.jpg)
Bolted under-blade
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/02/spazzatrice-apertura-idraulica-450x450.jpg)
Hydraulic opening
Bucket opening by two hydraulic pistons
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/01/connettore-450x450.jpg)
Connector 8-14 poles 12 V
![](https://www.cmcrushermachines.com/wp-content/uploads/2023/02/Benna-spazzatrice-1.png)
Customised connection
Pre-arrangement according to the operating machine.
Reinforced brushes
Increased PPL internal brush ø 600 mm as standard
Internal components
Internal hydraulic motor protected from dust and shocks.
Flow dividers
For switching on/off side brush rotation
Transmission
Chain
Adjustment of brush wear
Brush wear indicator with quick brush adjustment for maximum utilisation and savings on maintenance costs